- Tropical Capacity cooling
system with engine driven fan.
- 12V starter
motor
- Heavy duty dry charged lead acid
battery complete with cables.
- Battery charging alternator 12V
- Mechanical speed governed in accordance
with ISO 8528
- Heavy Duty dry air cleaner with replaceable
element
- Self Venting Fuel system with replaceable
fuel filter and water separator
- Full flow lube oil & fuel filters
with replaceable elements
- Engine protection for low oil pressure
and high water temperature and overspeed
- Exhaust silencer connector
- Engine block manufactured from cast
iron
- Coolant heater
AEC only uses engines with a proven track
record in the power industry. The main emphasis being towards
IVECO, VOLVO and DEUTZ. By using well respected and branded
products the user will have assurances that parts can be readily
procured anywhere in the world.
ELECTRONIC
An Electronic Governor works by counting the teeth on the
flywheel of the alternator as it rotates and regulates the
fuel flow accordingly. This in turn controls the engines speed
thus producing a stable output frequency of 50Hz. It is essential
to have electronic governing on the engine when the Generator
is being used with a UPS system.
ALTERNATOR
Meccealte model, brushless self exciting, self
regulating screen protection and drip proof with the following
characteristics.
- Class H insulation with severe environmental
protection
- 4 Pole
- 2/3 pitch winding
- IP21 enclosure protection
- Tropical protected with impregnated
windings
- Single bearing and close coupled
- Automatic Voltage Regulator UVR6
+/- 1.5%, incorporating voltage adjustment potentiometer
and under frequency protection.
The Mecc Alte Alternator, which, when used in
conjunction with the Deep Sea Controller offers high overload
characteristics. Being able to cope with a high demand although
for a short period is a crucial feature especially when the
generator is supporting inductive loads with high start up
requirements such as pumps, air conditioning, motors etc…
SOUND ATTENUATED CANOPY
The canopy supplied on the generating set is
completely manufactured at the factory. Unlike other Generator
manufacturers who have their canopies manufactured elsewhere,
AEC complete the whole process from start to finish. The low
air velocity, fully waterproofed sound attenuated enclosure
of compact design comes with 4 vertically hinged, generously
sized, lockable doors to allow easy access for maintenance.
A unique and special painting process ensures that the canopy
is treated against corrosion and the most extreme of weather
conditions. A polyester powder coated paint is then added
for additional durability.
A emergency stop button is also standard on
the Canopy.
FUEL TANK (Standard)
A BUNDED fuel tank is incorporated on the base
frame of the Genset. This prevents any leakages from the internal
fluid of the Generator leaking into the environment. The base
frame itself is manufactured from heavy duty steel with anti
vibration mounts between the engine and alternator feet and
the frame.
AUTO MAINS FAILURE PANEL BY DEEP
SEA ELECTRONICS
The Automatic Mains Failure Panel fitted on
the Generator is used to monitor the mains supply and automatically
start the standby generator set. The module also provides
indication of operational status and fault conditions, automatically
shutting down the genset and indicating failures by means
of a clear, backlit LCD Display. Operation of the module is
via pushbutton controls mounted on the front panel.
The panel provides metering and alarm facilities via the LCD
display including the following:
- Mains Voltage (L1-N, L2-N,
L3-N)
- Mains Voltage (L1-L2, L2-L3, L3-L1)
- Frequency
- Engine Speed
- Generator Voltage (L1-N)
- Generator Current (L1,L2,L3)
- Engine Oil Pressure
- Engine Coolant Temperature
- Hours run Counter
- Battery Voltage
LTS PANEL (Load Transfer
Switch Remote)
The contactors used for this generator are rated
at 800AMPS. These contactors are fitted inside a custom panel
and are remote to the generator.
COOLANT HEATER AND BATTERY CHARGER
The water jacket heater is standard on all Generator
sets supplied by ourselves . The water heater’s job
is to keep the engine warm and provide a reliable start up
of the generator in cold weather conditions. The battery charger
ensures that the start up battery is fully charged to again
prevent the Genset from note starting.
OIL SUMP PUMP
The oil sump pump is standard on all generating
sets supplied by ourselves. It is a vital piece of Equipment
if a routine service is to be carried out with minimum mess.
PAINTING FINISH
The best 4 step painting process are used.
Each piece of metal work has to complete this process. Individual
Dip tanks form steps of the process.
- Process 1 – De-greasing Tank.
This tank removes all grease and dirt from the surface of
the metal
- Process 2 – Hydrochloric Acid
Tank. This tank is used to remove any surface corrosion
- Process 3 – Zinc Plating Tank
– Once the metal is clean and free from corrosion
it is Zinc plated to stop corrosion from occurring if the
paint finish is damaged.
- Process 4 – Electrostatic powder
coating.
MECHANICAL BUILD
The Rock-wool attenuation is manufactured and
formed to suit the canopy. Once the basic canopy is complete
it will be placed into stock ready for order specific use.
The canopy will then be removed from stock and taken through
into the build completion area where the engine and electrics
are installed and the unit tested
|
